Wireless Communication technology for the Multimedia

Bluetooth is Service was a communication technology wireless (without the cable) that operated in the frequency tape 2.4 of GHz unlicensed ISM (industrial, Scientific and Medical) by using one frequency hopping tranceiver that could provide the service and the voice of data communication in a manner real-time between host-host bluetooth and the distance of the range of the limited service (around 10 metre).
Bluetooth personally could take the form of card that the form and his function almost be the same as card that was used to wireless local the area network (WLAN) where using the frequency of IEEE standard radio 802.
11, only in bluetooth had the range of the distance of the shorter service and the transfer capacity of the lower data.

Basically bluetooth was created not only to replace or eliminated the use of the cable inside carried out the exchange of information, but also could offer fitur that was good for technology mobile wireless at a cost of that was relatively low, consumption of the low power, interoperability that was promising, was easy in the operation and could provide the service that various things.

To give the picture that was sharper concerning technology bluetooth that was relatively new this to the reader, along with was untangled about the history of the emergence bluetooth and his development, technology that was used in the system bluetooth and the aspect of the service that could be provided, as well as few analyses about the comparison of the modulation method spread spectrum FHSS (Frequency Hopping Spread Spectrum) that was used by bluetooth compared with the method spread spectrum DSSS (Direct Sequence Spread Spectrum).
In May 1998, the champion's 5 companies that is Ericsson, IBM, Intelligence, Nokia and Toshiba formed one of Special Interest Group (SIG) and began to make the specification that was named by them ‘bluetooth’.

In July 1999 the specification document bluetooth the version 1.
0 began to be launched.
In December 1999 was begun again by the production of the specification document bluetooth the version 2.
0 with the addition 4 new champions that is 3Com, Lucent Technologies, Microsoft and Motorola.
At this time, more than 1800 companies in various fields in part in the field semiconductor manufacture, PC manufacture, mobile network carrier, companies automobile and water lines bergambung in a consortium as adopter technology bluetooth.
These foremost companies in part like Compaq, Xircom, Phillips, Texas instruments, Sony, BMW, the Puma, NEC, Casio, Boeing, etc..
Although the Bluetooth SIG standard at this time ‘dimiliki’ by the group of the champion but he will it was hoped become a IEEE standard (802.15).

Protocol bluetooth used a combination between circuit switching and packet switching.
Bluetooth could support a data canal asinkron, three synchronous voice canals simultaneous or a canal where simultaneously supported the data service asinkron and the synchronous voice.
Each voice canal supported a synchronous voice canal 64 kb/s.
The canal asinkron could support the maximal speed 723.2 kb/s asymmetric, where for the direction was the reverse could support up to the speed 57.6 family planning/s.
Whereas to mode symmetrical could support up to the speed 433.9 kb/s.


An equipment that had technology wireless bluetooth will have the capacity to carry out the exchange of information with the distance of the range up to 10 metre (~30 feet).
The system bluetooth provided the communication service point to point and communication point to multipoint.
The product bluetooth could take the form of PC card or USB adapter that was put into equipment.
Equipment that could diintegerasikan with technology bluetooth in part: mobile PC, mobile phone, PDA (Personal Digital Assistant), headset, the camera, printer, router et cetera.
Applications that could be provided by the service bluetooth this in part: PC to PC file the transfer, PC to PC file synch (notebook to desktop), PC to mobile phone, PC to PDA, wireless headset, LAN connection via ethernet access point and etc.

Bluetooth FHSS vs WLAN DSSS
In fact why bluetooth more chose the FHSS method (Frequency Hopping Spread Spectrum) compared with DSSS (Direct Sequence Spread Spectrum).
The reason that made why bluetooth did not use DSSS in part as follows:

1.FHSS needed consumption of the power and the complexity that were lower compared with DSSS this was caused because DSSS used the speed chip (chip rate) compared with the speed of the symbol (symbol rate) that was used by FHSS, so as cost that was needed to use DSSS will be higher.

2.FHSS used FSK where endurance of the disturbance noise relative better compared with DSSS that usually uses QPSK (for IEEE 802.
11 2 Mbps) or CCK (IEEE 802.
11b 11 Mbps).

Although FHSS had the distance of the range and the transfer of the data that was lower compared with DSSS but for the service was supervised 2 Mbps FHSS could give the solution cost-effective that was better.
Read more....!
Posted by Admin, Thursday, March 22, 2007 9:26:00 AM | 0 comments |

Seamless Mobility

During him to no longer distinguished the function of the house telephone, the office telephone, personal enamel, and phonsel you.
The existence seamless mobility enabled anyone to terkoneksi by any, including communicating with plasama the house TV.

For the last three year you have enjoyed many benefits of cellular technology latest, from that was simplest sepertti voice calling, smsed, GPRS, MMS, the video streaming, the speed of data access via EDGE and CDMA-1X, to now that just just emerged like technology 3G and convergence between cellular and access broadband.

Further possibly you still do not think about many matters to terkoneksi with the digital thing thing in and around us.
The concept seamless mobility that was introduced by Avaya Technology and Motorola became one of the new solutions to speed up the process kovergensi between you, technology wired and wireless, and any available in and around us.

Alcatel and Ericsson mentioned him as mobile triple play tried to be visited by you http://www.freescape.com/seamless, there was shown that this concept enabled you to continue terkoneksi and synchronisation with the digital device that has disesuikan with your personal data.
For example when you were being in the carriage sembari saw the presentation of football from live the TV in the screen phonsel, and you too could continue him when arriving in the station and following the trip by the car.

You could listen to his direct report from car stereo radio or the screen plasmaTV in the car.
When until in home, then the presentation live this TV will continue to the personal TV in the house without did setting the manual to the channel TV. And like that henceforth.

This all was enabled by the blessing konfergensi the network that was high between wired and wireless, used internet technology protocol (IP), and interoperability and kontabilitythat was high.
The concept seamless mobility made the cellular phone the main key from all the activities, good in the house, in the office, and anywhere.
And as means to connect with the directory database in the office and most synchronous with digital equipment in the house as re-beads.

All was done in a real manner time by giving priority to the concept seamless that connected between humankind and equipment, humankind with humankind, equipment with humankind, and equipment with equipment.
Seamless mobility introduced in user a new convergence technology that connected between the function wired and wireless, voice and the data, as well as local and wide the area.
Wired voice and the network of the data in the function enterprise him normally went with fitur voip, in his convergence between keduan him, the data went together on the network of the cellular area, and in implemetasikan inside voice-enabled WLANs.
The intensity in this very convergent environment, the user only needed one kind handheld then.
To connect the two funsi this, then was created one single handheld
that very multimode, the multi-band, and multimedia.
One of them with made dual-network phone that could terkoneksi with IEEE 802.
11 standards of Wi-Fi to connect with FANTASTIC-based IP-PBX, and in the environment of the cellular phone industry could do seamless handoff between WLAN access point in one industrial environment, and outside between voice enabled-WLAN and the network selular.
This solution was very useful for enterprise market, because handheld the user apart from terkoneksi with the cellular channel, also could enjoy facilities that were given by the company, including the conference call, call hold and access voice inside database and the company's directory.

Basically with the existence of the solution seamless mobility, was hoped the profit that was obtained from convergence of several networks was to reduce the management cost from several networks.
With the technological emergence 3G this end end, was hoped for by all sitem multimedia as well as the implementation seamless mobility could real was felt in and around us, his matter with the existence 3G, technology seamless mobility can be realised.
Read more....!
Posted by Admin, Thursday, March 15, 2007 12:20:00 PM | 0 comments |

Your Ad Here